|
Shot
|
Time
|
Operator
|
Iplasma(kA)
|
n(1018m-3)
|
Duration (ms)
|
Pre/post shot comments
|
| 14951 | 2007-05-02 16:30:55.221 | pduarte | 3.4 | 2.2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 33mm. Cu-nD position at 31,5cm. Voltage on SE30F. ZEFF turned off |
| 14950 | 2007-05-02 16:24:09.317 | pduarte | 3.4 | 2.2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 33mm. Cu-nD position at 31,5cm. Voltage on SE30F. ZEFF. |
| 14949 | 2007-05-02 16:17:17.871 | pduarte | 3.4 | 2.2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 33mm. Cu-nD position at 31,5cm. Voltage on SE30F. ZEFF. |
| 14948 | 2007-05-02 16:09:15.811 | pduarte | 3.5 | 2.3 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 33mm. Cu-nD position at 31,5cm. Voltage on SE30F. ZEFF with non-halogen car lamp at 6V. |
| 14947 | 2007-05-02 16:00:29.10 | pduarte | 3.4 | 2.3 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 33mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14946 | 2007-05-02 15:53:57.574 | pduarte | 3.3 | 2.1 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 33mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14945 | 2007-05-02 15:48:36.343 | pduarte | 0 | 0 | 0 | ELCO failure |
| 14944 | 2007-05-02 15:41:45.514 | pduarte | 3.5 | 2.4 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 30mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14943 | 2007-05-02 15:29:56.216 | pduarte | 3.5 | 2.4 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 30mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14942 | 2007-05-02 15:23:24.771 | pduarte | 3.5 | 2.4 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 30mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14941 | 2007-05-02 15:17:00.893 | pduarte | 3.4 | 2.4 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 30mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14940 | 2007-05-02 15:10:36.375 | pduarte | 3.3 | 2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 25mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14939 | 2007-05-02 15:05:03.153 | pduarte | 3.4 | 2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14938 | 2007-05-02 14:55:19.325 | pduarte | 0 | 0 | 0 | ELCO failure |
| 14937 | 2007-05-02 14:48:03.657 | pduarte | 3.4 | 2.1 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14936 | 2007-05-02 14:35:52.374 | pduarte | 3.4 | 2.2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14935 | 2007-05-02 14:28:34.533 | pduarte | 3.4 | 2.3 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 31,5cm. Voltage on SE30F. |
| 14934 | 2007-05-02 14:21:54.536 | pduarte | 3.5 | 2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 31cm. Voltage on SE30F. |
| 14933 | 2007-05-02 14:10:15.125 | pduarte | 3.4 | 2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 31cm. Dens on SE30F. |
| 14932 | 2007-05-02 14:05:05.947 | pduarte | 3.2 | 2.4 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 30cm. Dens on SE30F. |
| 14931 | 2007-05-02 13:59:06.401 | pduarte | 3 | 2.2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 30cm. Dens on SE30F. |
| 14930 | 2007-05-02 13:50:35.653 | pduarte | 2.6 | 2.3 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 30cm. Dens on SE30F. |
| 14929 | 2007-05-02 13:40:30.251 | pduarte | 2.5 | 2 | 30 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 30cm. Dens on SE30F. |
| 14928 | 2007-05-02 13:29:59.573 | pduarte | 0 | 0 | 4 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 30cm. Dens on SE30F. |
| 14927 | 2007-05-02 13:23:36.25 | pduarte | 2.5 | 2.3 | 16 | R = 0,2ohm. ELCO = 150V. Mixed feedback on power supplies. P=1.30x10^-4mbar. Z setpoint = -10mm and R setpoint = 20mm. Cu-nD position at 30cm. Dens on SE30F. |
![[Logo] Instituto Superior Técnico](pics/wwwist.gif)