Session aimTests for Magnetic pickup coils and data acquisition
Session day2025-03-31Operatorrhenriques
Session IDISTTOK_20250331_1Coordinatorrhenriques

Shot Time Operator Iplasma(kA) n(1018m-3) Duration (ms) Pre/post shot comments
520972025-04-01 15:01:25.433rhenriques000Test RT3 with 0.5 Vpp 85 Hz square wave and firmware for chopper |
520962025-04-01 14:23:05.317rhenriques000Test B3 (2MSps) with 12 Vpp 85 Hz sine wave after having fiddled with its modules | OK
520952025-04-01 14:14:57.796rhenriques000Repeat with 0 V (shorted input) | OK
520942025-04-01 14:08:08.354rhenriques000Repeat with -1.596 V | OK
520932025-04-01 14:00:53.778rhenriques000Repeat RT3 ch.9-16 and 25-32 with calibration voltage of +1.596 (4.096-2.5) V | OK
520922025-04-01 13:17:11.338rhenriques000Repeat with 5.1 Vpp 85 Hz sine wave to check channel saturation |
520912025-04-01 12:51:09.405rhenriques000Repeat informatic pulse after swapping RT3 by spare board with same chopper modules. Firmware is still RT one (no integration nor chopping). Testing channels 9-16 and 25-32 | All modules OK
520902025-04-01 10:10:44.664rhenriques000Repeat for 2 MSps board with chopper modules on ch. 9-16 and 25 |
520892025-04-01 10:03:29.073rhenriques000RT3 with RT firmware and 4 Vpp 85 Hz sine wave as input |
520882025-03-31 17:12:31.58rhenriques000Repeat with signals on RT2 to check that everything is OK with the board | OK
520872025-03-31 16:49:52.153rhenriques000Repeat with same firmware on RT3 as in RT2 (in case this was a firmware issue) |
520862025-03-31 15:55:05.876rhenriques000Repeat with modules moved to channels 17-24 and some chopper modules swapped by normal ADC modules (ch. 12-16 and 30-32) |
520852025-03-31 15:36:42.165rhenriques000Repeat with normal ADC modules added to the first 8 channels of the board (RT3) to check if the firmware is working properly |
520842025-03-31 15:15:40.854rhenriques000Informatic pulse, no TF or PF currents, test chopper modules with RT firmware (no chopping) and a signal of 5.3 Vpp 85 Hz sine wave | all 0
520832025-03-31 09:43:48.80rhenriques000Informatic pulse, no TF or PF currents, test chopper integrators with 2 Vpp 85 Hz square wave | no signal integration