Session aimPlasma pulses to assess machine condition and conditioning the vessel
Session day2025-07-14Operatorrhenriques
Session IDISTTOK_20250714_1Coordinatorrhenriques

Shot Time Operator Iplasma(kA) n(1018m-3) Duration (ms) Pre/post shot comments
531732025-07-14 15:55:16.19rhenriques1.3017Repeat | Better (less impurity signal)
531722025-07-14 15:01:37.011rhenriques1.3017Repeat | Better
531712025-07-14 14:56:08.911rhenriques1.3017Repeat | All cycles are OK, getting better conditioning
531702025-07-14 14:50:45.955rhenriques1.3017Repeat with 50 cycles | Better, more switching for Ip control, lower optical signal for impurity and cycles started to failed towards the end
531692025-07-14 14:44:38.896rhenriques1.3017Repeat with 20 cycles | OK, although no clear evolution is observed
531682025-07-14 14:39:57.293rhenriques1.3017Repeat #53133 with 10 cycles (controlled Ip at 1.3 kA) | Ip still not at requested value, no switching. All cycles OK
531672025-07-14 13:16:58.303rhenriques-1.43026Repeating with a bit more prefil gas as ratio between Adm. and MC is very different than reference | density signal not working, Ip still very low
531662025-07-14 13:10:15.903rhenriques-1.84026Repeat (1) 53101 to assess max Ip and wall conditioning | Ip mainly at 1.3 kA, very weak plasma
531652025-07-14 12:59:26.393rhenriques000Repeat with increased voltage of power bank for primary coil (back to 240 V) | Everything OK
531642025-07-14 12:48:42.212rhenriques000Dryrun (file: dryrun_standard_2025_04_04_52149.cfg), no TF | PF currents OK