Session aimPulses (with plasma) to test the chopper integrators
Session day2025-07-22Operatorrhenriques
Session IDISTTOK_20250722_1Coordinatorrhenriques

Shot Time Operator Iplasma(kA) n(1018m-3) Duration (ms) Pre/post shot comments
532202025-07-22 14:29:47.474rhenriques-4.354.526Repeat with IPLB and IPLA swapped (IPLB in ch15 and IPLA in ch10) | OK, Ip flattop around 3 kA
532192025-07-22 14:23:06.642rhenriques-3.92.726Repeat 53213 to get higher Ip for integrators testing (IPLB still in ch10 and IPLA in ch15) | OK, Ip similar to reference
532182025-07-22 14:15:57.694rhenriques1.33.517Repeat with IPLB and IPLA connections swapped (IPLB in RT3ch10 and IPLA in ch 15) | OK
532172025-07-22 14:09:16.531rhenriques1.33.517Repeat with IPLA raw (non-integrated) signal connected to RT3ch10 (instead of Mirnov coil no. 10) for comparison with IPLB in RT3ch15 | OK
532162025-07-22 14:00:41.103rhenriques1.33.417Repeat | Back to only negative ones, no clear evolution in the conditioning
532152025-07-22 13:53:35.648rhenriques1.33.417Repeat to assess conditioning evolution | Started with positive semi-cyles and then negative semi-cycles only
532142025-07-22 13:46:00.31rhenriques1.34.617Repeat 53201 for conditioning (1.3 kA, 50 cycles of 17 ms), to test integrator with IPLB on RTch15 | Mainly negative semi-cycles and very few positive ones
532132025-07-22 13:16:12.232rhenriques-44.126Repeat (3) 53101 to assess max Ip and wall conditioning, IPLB in RT3ch15 (G~1 normal module) and analog integrator only | OK, Ip flattop around 2.7 kA
532122025-07-22 13:11:30.58rhenriques-3.44.126Repeat (1) 53101 to assess max Ip and wall conditioning, IPLB in RT3ch14 (G1 modified) and analog integrator only | OK, Ip flattop slightly higher
532112025-07-22 13:05:31.936rhenriques-3.24.126Repeat (1) 53101 to assess max Ip and wall conditioning, IPLB in RT3ch13 (G100) and analog integrator only | OK, Ip flattop around 2.4 kA
532102025-07-22 12:56:00.941rhenriques000Dryrun (file: dryrun_standard_2025_04_04_52149.cfg), no TF | PF currents OK